home *** CD-ROM | disk | FTP | other *** search
- Path: shellx.best.com!usenet
- From: Rigor@clever.net (Matt Fox)
- Newsgroups: comp.dcom.modems
- Subject: Re: Sportster 28.8 problem: NO DIALTONE on autodial
- Date: 6 Jan 1996 15:13:03 GMT
- Organization: Best Internet Communications
- Message-ID: <4cm3hv$9o0@shellx.best.com>
- References: <4cjs6r$2dc@hudson.lm.com>
- NNTP-Posting-Host: belvdere.vip.best.com
- X-Newsreader: WinVN 0.99.5
-
- In article <4cjs6r$2dc@hudson.lm.com>, bvryen@telerama.lm.com says...
- >
- >Hello,
- > I have an intermittent problem where the modem goes off-hook to dial
- >and the Trumput autodialler pauses and then indicates there is no
- >dialtone. I can hear the dial tone through the speaker and the
- >autodialler successful connects 2 out of 3 times, but I 'd like to
- >have a more consistent connection rate. Which registers address these
- >sort of problems? (I already looked at the Navas FAQ but to no
- >avail.Sporster manual not much help.)
- >
- >My current init string:&F0&A3&B1&H1&R2&D2&C1X4S25=100S7=90S10=25
- >
- >TIAFAH
- >
- >Bruce
- >
-
- change the x4 to x3
-
-